Introducing a new, innovative, easily installed system for soldering cable terminations. All too often technicians are unprepared to install larger lugs and battery type connectors. Our SCT series consists of a premeasured solder pellet and adhesive-lined heat shrink tubing that combined, provide maximum conductivity and a corrosion proof seal. When heated, the solder pellet provides a secure, soldered connection for maximum conductivity from wire to connector, then insulated with the adhesive-lined heat shrink tubing, ensuring each termination is now individually protected from corrosion, contaminants, and current leakage.
Soldered Cable Termination Kit-Kit contains 10 each of Solder Pellet for 4, 2, 1, 1/0, 2/0, 3/0 & 4/0 AWG and 15 - 1/2” & 3/4” & 5 - 1.1” Dual Wall Shrink Tubing, Red & Black 1 Bottle of ELA-Flux (2 0z.)
Features:
- Solder Pellets are pre-measured to assure the right amount of solder- Colour coded to ensure correct product identification
- Use current inventory – no need to purchase “Solder Only” connectors - Can be used on any closed-end battery terminals or starter lugs
- Flux core prevents dirt and contamination from hindering the soldering process Heavy Wall adhesive-lined heat shrink tubing provides a permanent seal against corrosion - Colour coded for positive identification of polarity ( +/-)
HEAT SHRINK TUBING
- Multiple Wall polyolefin heat shrinkable tubing with a meltable, adhesive-lining
- Operating Temperature Rating -55ºC to110ºC (-67ºC to 230ºF)
- Tensile Strength 2100 PSI
- Minimum Shrink Temperature: 121ºC (250ºF)
SOLDER PELLET
- Melting temperature: 182ºC (361ºF)
- Applicable Specification: J-STD-006
- Solder contains any or all of the following: Antimony,
- Cadmium, Copper, Indium, Silver, Iron, Aluminum, Nickel, Arsenic, Zinc, Bismuth, Gold,Tin, Lead
FLUX
- 2-3% Rosin, Mildly Activated
- Applicable Specification: J-STD-004
|