Mity MarkTM Disk Marker System
[Top]
|
|
|
The MityMark™ Compact Disk Marker System features 500 PVC sleeve wire markers packaged on a convenient reel for ease of use. Each sleeve marker is 3mm in length with a single black character on each marker. Each marker is chevron cut to assure proper positioning as multiple markers are applied. Standard marker color is white, with yellow available on request.The legend is pin point ink jet eched on each marker. The MityMark Compact Disk Markers are available in two sizes to accommodate 22-16 and 16-10 AWG wire. Ordering Information
|
|
|
Mity MarkTM Portable Wire Marker Dispenser
[Top]
|
|
|
Specifications: |
Compact and Convenient (can be hooked on a tool pouch or carried in a shirt pocket) Reusable/refillable Pre-cut markers Tyvek material Acrylic Adhesive Silicone Release Liner Multiple legends
|
|
|
The ZipTape Mity Mark™ Dispenser is the most user friendly portable wire marker system available on the market today. Each dispenser contains 10 rolls of marker tape, numbered 0 - 9. Each roll contains 76 individual markers with a pre-determined length of 1-1/4” and a width of 1/4”. A total of 760 markers per dispenser in a convenient size to accommodate most commonly identified wire sizes. Replacement markers must be ordered in boxes of 10. Each individual marker is mounted on a silicone release liner and has an acrylic adhesive, which is resistant to oil and water, and has a usable temperature range of -40°F to +250°F. The marker itself is made of Tyvek™ to assure durability and minimize the potential of tearing during application.
|
|
|
Mity MarkTM Voltage Markers
[Top]
|
|
|
ZipTape voltage markers are designed specifically to identify conduit, cable trays, load centers, busways, circuit breakers, switches, fuse boxes and other vital electrical equipment. There are three styles of markers, all on a 2.25" x 9" card.The marker is made of heavy gauge orange vinyl, and the adhesive is high tack acrylic.Voltage markers are packaged with 5 identical cards per polybag. Custom legends are also available.
|
|
|
Mity MarkTM Wire Marker Booklets
[Top]
|
|
|
ZipTape MityMark Wire Marker Booklets offer a convenient pocket sized package of tape wire markers. Each booklet contains 10 pages of pre-cut markers 1-1/4" long, totaling 450 wire markers with 450 matching terminal markers sized 3/16" x 3/16". Ten different booklets are available containing a combination of industry recognized numbers, letters, NEMA colours and legends. Each booklet is available in either the standard vinyl cloth material or tear resistant TyvekTM material. Ordering Information When ordering, replace the “#” with the material type you prefer. Cloth - C TyvekTM - T Description
|
|
| Description |
Legend |
Qty/Pkg. |
Price |
Qty |
Add To Cart |
| +,-,AC,DC,POS,NEG,GND,NEUT,SPARE,BLANK |
|
|
|
|
|
| 0 thru 9 (Sequence) |
|
|
|
|
|
| 0 thru 9 (Solid) |
|
|
|
|
|
| 0-9,L1-L3,T1-T3 |
|
|
|
|
|
| 1 thru 45 |
|
|
|
|
|
| 1,2,3 |
|
|
|
|
|
| 10 NEMA Colour (White,Yellow, Green, Blue, Orange, Red, Purple, Brown, Black, and Grey) |
|
|
|
|
|
| 1-14,A,B,C,+,L-1,L-2,L-3 |
|
|
|
|
|
| 1-30 Wire Marker |
|
|
|
|
|
| 49 thru 90 |
|
|
|
|
|
| A,B,C |
|
|
|
|
|
| A-Z, 1-15, +,-,/ |
|
|
|
|
|
| Burglar Alarm |
|
|
|
|
|
| L1,L2,L3 |
|
|
|
|
|
| T1,T2,T3 |
|
|
|
|
|
|
Nylon Cable Clamps
[Top]
|
|
|
Designed to secure the routing of cables, harnesses, and hoses Radius edges protect against insulation abrasion and cutting hoses Quick alignment is achieved with bottom oval screw hole Accurate selection is made easy with clearly identified diameter sizes
|
|
|
Polyethylene Black Split Loom :50’ Coiled & Bagged
[Top]
|
|
|
Designed to hold and protect cables, harnesses, and hoses Quick and easy to install, slit automatically closes after installation UV Black provides excellent outdoor ultraviolet light protection Material Low density polyethylene and linear low density polyethylene blend Performance Characteristics Flexibility: Excellent Abrasion Resistance: Good Chemical Resistance: Good Operating Temperature: -40ºC to 93ºC (-40ºF to 200ºF)
|
|
|
Polyethylene Black Split Loom :Bulk - Continuous Spool Lengths
[Top]
|
|
|
Designed to hold and protect cables, harnesses, and hoses Quick and easy to install, slit automatically closes after installation UV Black provides excellent outdoor ultraviolet light protection Material Low density polyethylene and linear low density polyethylene blend Performance Characteristics Flexibility: Excellent Abrasion Resistance: Good Chemical Resistance: Good Operating Temperature: -40ºC to 93ºC (-40ºF to 200ºF)
|
|
|
Spiral Wrap :Packaged in 100 ft reels
[Top]
|
|
|
Spiral protective sheathing wraps on like tape and allows flexible routing and break-outs of single/multiple wires Prevents kinking and curling of wires Absorbs vibration, insulates cables and protects wires from abrasion Quick and easy to install due to flexible polyethylene construction
|
|
|
Stainless Steel Cushioned Cable Clamps :(with black rubber)
[Top]
|
|
|
Clamps are corrosion resistant and have a removable rubber cushion which helps cut vibration while protecting the loom or cables Typical application includes holding hydraulic hoses, wire harnesses, and cables The mounting hole is 17/64" for 1/4" screw or bolt When selecting cable clamps for use with wire loom, always choose the next size up from the size of the wire loom (for example, for 3/8" wire loom, use 1/2" clamps)
|
|
|
Terminal Strips :Dual Row
[Top]
|
|
|
Specifications: |
Specifications Material Hi-Temperature Thermoplastic with No. 6-32 external twin screws Spacing: 7/16” center to center Wire Range: 22-16 AWG Voltage Rating 300 Volts Current Rating: 20 Amps
|
|
|
Ideal for surface mount, sub-panel or chassis connection in electronic/electrical circuit applications
|
|
|
Terminal Strips :Dual Row Mounting Hardware
[Top]
|
|
|
Term-Lok®
[Top]
|
|
|
Term-Lok® compressor stake on repair kits are guaranteed for the life of the compressor. They are easy to install and won’t break down under heat.
Features/Benefits: • A precision brass cylinder • Wires are permanently attached • Stainless Steel set screws • Standard factory 600 volt 65 strand machine wire • Set of three colour coded wires • Insulator included • Application wrench included
Available in three wire sizes: TLC-3-8 Gauge will service a 5 ton unit or larger TLC-3-10 Gauge will service a 3-5 ton unit TLC-3-12 Gauge will service a 1-3 ton unit
|
|
|