TERMINAL & CONNECTORS INFORMATION

  • Maximum electrical conductivity after crimping
  • Funnel edged barrel for fast, easy insertion of wire
  • Maximum holding power
  • Tin plating prevents corrosion
  • Wire range clearly stamped on neck of terminal
  • Crimped for mechanical reliability
  • Soldered for strength and conductivity
  • Adhesive-lined polyolefin seals the connection
  • Colour coded for easy wire identification
  • Translucent tubing allows for visual inspection

Uninsulated Butted Seam Terminal

  • Constructed of electrolytic (ETP) copper
  • Wire Range: 8 - 4/0 AWG
  • Continuous Operating Temperature Range: 75ºC (167ºF)
  • Voltage Rating: 300V / 600V

Uninsulated Brazed Seam Terminal

  • Constructed of electrolytic (ETP) copper
  • Wire Range: 22 - 10 AWG
  • Continuous Operating Temperature Range: 75ºC (167ºF)
  • Voltage Rating: 300V / 600V

Pre-insulated Funnel Entry Vinyl Terminal

  • Vinyl insulation sleeve withstands the pressure of crimping
  • Colour coded for easy identification
  • Wire Range: 22 - 4/0 AWG
  • Continuous Operating Temperature Range: 75ºC (167ºF)
  • Voltage Rating: 300V / 600V

Pre-insulated Funnel Entry Nylon Terminal

  • Nylon insulation sleeve provides high dielectric strength
  • Colour coded for easy identification
  • Wire Range: 22 - 10 AWG
  • Continuous Operating Temperature Range: 105ºC (221ºF)
  • Voltage Rating: 300V / 600V

Heat Shrinkable Terminals & Connectors

Wire Range: 22 - 8 AWG
Shrink Temperature: 180ºC (356ºF)
Temperature
Range:		 -55ºC to 125ºC (-67ºF to 257ºF)
Voltage Rating: 600 Volt max.

 

Heat Shrinkable Solder & Seal Terminals & Connectors

Wire Range: 22 - 10 AWG
Shrink Temperature: 149ºC (300ºF)
Temperature
Range:		 -55ºC to 110ºC (-67ºF to 230ºF)
Voltage Rating: 600 Volt max.

 

Heat Shrinkable Crimp, Solder & Seal Terminals & Connectors

Wire Range: 22 - 10 AWG
Shrink Temperature: 149ºC (300ºF)
Temperature
Range:		 -55ºC to 110ºC (-67ºF to 230ºF)
Voltage Rating: 600 Volt max.

 
Terminal & Connector Identification
         
         
Polyvinyl Chloride (PVC) and Nylon insulated connectors are colour coded for quick wire identification. The National Electrical Manufacturers Association’s ( NEMA) standard for colour coding is as follows:
 
Wire Size
(AWG)
Insulation
Colour Coding
Stud
Size
Tab
Size
Bullet/Snap
Plug Size
         
         
26-24
Yellow
#4
.110”
.157”
22-18
Red
#6
.187”
.176”
16-14
Blue
#8
.205”
.180”
16-12 H.D.
Yellow
#10
.250”
.197”
12-10
Yellow
1/4”
.375”
8
Red
5/16”
6
Blue
3/8”
4
Yellow
1/2”
2
Red
3/4”
1/0
Blue
2/0
Yellow
3/0
Red
4/0
Blue